In this blog, we’ll talk about how to reset TCL Roku tv. Resetting a TCL Roku TV can resolve issues such as freezing or crashing. To reset the TV, access the Settings menu and look for the “System” or “Advanced system settings” options. From there, you should be able to find the “Factory reset” or “Reset TV” option. Remember that resetting the TV will erase all your personalized settings and data, so be sure to back up any important files before proceeding with the reset.
How to Reset TCL Roku TV via Black Screen
There is a wide range of potential explanations for why a television may display nothing but a black screen, but the list of possibilities is straightforward to reduce.
Checking to see whether the LED on the front of the TCL television is lit up, which indicates that the television is powered on, is an essential step to do initially.
Press the power button on the remote control to turn off the TCL Roku TV.
Note: Then you should check whether the front LED lights turn on when you push the power button on the remote a second time.
Reset TCL Roku TV By Pressing Reset Button
Suppose the screen on your television goes black, and you cannot access the menu or settings to reset your television. In that case, you may reset it by pushing the button at the back of the panel on your television.
Note: Take note that when you do a factory reset, all of the programs, saved WiFi passwords, and other personalized settings will be deleted.
The button to reset the TCL Roku TV can be found in the rear, close to where the connection panel sits. A little button has been cut off and is located immediately below the HDMI ports. You will need a pin or a pen in your possession to hit this button.
Keep pressing and holding the reset button until the power button on your TV appears, then release it and turn it back on. The time needed for this procedure is between 8 and 10 seconds. When the screen shows, you may let go of the button. Your TV will automatically restart after a few seconds, at which point you will be presented with a screen asking you to set it up.
Reset TCL Roku TV By Using The Remote
A Roku TV may have its settings restored from the factory by entering certain instructions using a remote control. Proceed in the following manner:
- Make five presses of the ‘Home‘ button on your remote control.
- After that, one time at the ‘Up‘ button.
- After that, make two presses with the ‘Rewind‘ button.
- To finish, you must hit the ‘Fast Forward‘ button twice.
Your TV will now display the setup screen, which may take up to two minutes to load completely. Following that, your TV will power on all over again. Your TV’s settings have been brought back to their factory defaults.
Read More: How to Get and Activate truTV on Roku
How to Solve Black Screen Problem in Roku
In addition to resetting your TV using the tips mentioned above and tactics, you can also try alternative solutions to the problem of a black screen appearing on your television.
- Check the Power Source and the Power Cords since there is a chance that the power cable is faulty or that the power source has been damaged. Your television displays a dark screen because the power source is malfunctioning.
- Check the Cable and Input Connections. If you see a black screen on your TCL television, but the sound is working, OK, the problem might be caused by faulty HDMI cable connections or USB devices that need replacing.
- Make Sure Your TV’s Firmware Is Up to Date: Outdated firmware might often be the culprit behind a blank screen on your TCL TV. The problem may be fixed by updating the firmware on the TCL TV.
Reset TCL Roku Tv By Disconnect Input Devices
If you want to rule out this option as quickly as possible, you should unhook all of the (video) cords that are attached to the rear of your TCL Roku TV.
The following is a list of all of the video inputs that are available on a TCL Roku TV:
- RCA (Component) and HDMI (HDMI ARC) connectors.
- Input for SDI Display Port Input for Display Port
How can I reset the reset button on my TCL Roku TV?
Press and hold the recessed RESET button on the TV connection panel with a straightened paper clip or ball-point pen. Hold down the RESET button for roughly 12 seconds. When the reset cycle is over, the status indicator dims. Remove your finger from the RESET button.
What is the procedure for resetting my Roku TV?
Locate the Reset button via the pinhole on the back of your TV between the antenna, HDMI, and audio connectors. Press and hold the reset button for at least 20 seconds with a straightened paperclip (or equivalent). After a few periods, your Roku TV will restart and show the Recovery Mode screen.
What should I do if my TCL TV has a dark screen?
On most models, the power button is located under the TCL logo on the bottom or behind the TV towards the right side. Please refer to your user’s handbook for the precise position. Unplug the television from the wall outlet. Reconnect the TV after 30 seconds.